Pavos' Westfield SE
From M-Tech Automotive
Pavos brought us his very well dressed Westfield SE for a touch of modernisation. Currently the car was running weber DCOEs on a 2.0 Silver Top Zetec. His aim was throttle bodies and full EFI!
Contents |
The beginning...
An inital power test was carried out to see what we were starting with. The car made a rather low 150bhp @ fly initally, which we can put down to an excessively rich mixture..
Throttle Body Fitment
On goes the Jenvey Throttle Body Kit, and Pre-terminated V4 engine wiring loom...
File:Westy5.jpg File:Westy6.jpg
Fuel System
Next up, converting from the single feed system to run injection means the installation of fuel swirl pot, high pressure fuel pump, regulator and return lines...
File:Westy7.jpg File:Westy8.jpg File:Westy9.jpg
ECU Installation
Using the plug and play loom meant that fitting was literally around an hour, and the car firec straight up on the basemap.
File:Westy10.jpg File:Westy11.jpg File:Westy12.jpg
Final Mapping and Results
It was then a case of strapping her down and carrying out some tweaking...
